|
Product Details:
Payment & Shipping Terms:
|
| DAMPING: | Absorbs Vibration For Longer Life, While Retaining Dimensional Stability. | TOOLING: | 4 To 5 Times Greater Tool Life. |
|---|---|---|---|
| FINISH: | Up To 5 Times More Machinable Than Rolled Aluminum. | Light Weight: | Easier Handling, Density Is 1.78, Less Than Aluminium 33% |
| Hight Strength: | Excellent Strength And Stiffness Per Unit Weight. | Non Magnetic: | Good For Electrical And Computer Applications. |
| Hardness,: | Rockwell E 75 | Tensile Strength: | Ultimate, MPa 230 |
| High Light: | AZ91D-T5 Forged Magnesium Plate,Hot Deformation Forged Magnesium Plate,AZ91D-T5 magnesium engraving plates |
||
Low hot deformation AZ91 forged magnesium plate AZ91D-T5 plate block slab disc cube ASTM standard for automotive
AZ91D has excellent corrosion resistance. Its ingot most commonly used magnesium die casting alloy.
Component Value Min Max
Aluminum, Al 8.3 9.7
Copper, Cu 0.03
Iron, Fe 0.005
Magnesium, Mg 90
Manganese, Mn 0.13
Nickel, Ni 0.002
Silicon, Si 0.1
Zinc, Zn 0.35 1
Properties Value Min Max Comment
Physical
Density, g/cc 1.81 -- --
Mechanical
Hardness, Brinell 63 -- --
500 kg load, 10 mm
ball
Hardness, Knoop 84 -- --
Estimated from
Brinell
Hardness, Rockwell E 75 -- --
Hardness, Vickers 71 -- --
Estimated from
Brinell
Tensile Strength, Ultimate, MPa 230 -- --
Tensile Strength, Yield, MPa 150 -- -- at 0.2% Offset
Elongation at Break, % 3 -- -- in 50 mm
Modulus of Elasticity, GPa 44.8 -- -- In Tension
Compressive Yield Strength, MPa 165 -- -- at 0.2% offset
Poissons Ratio 0.35 -- --
Charpy Impact, J 2.7 -- -- V-notch
Fatigue Strength, MPa 97 -- --
R.R. Moore Test,
5E+8 Cycles
Shear Modulus, GPa 17 -- --
Shear Strength, MPa 140 -- --
Electrical
Electrical Resistivity, ohm-cm 1.43e-005 -- --
| type | magnesium alloy plate |
| Thickness |
300 mm or as customer's required
|
| Width | 900.0 mm or as customer's required |
| Length | 2000mm or as customer's required |
| size | 1000*2000mm, 1219*2438mm, 1219*3048mm, or as customer's required |
| Application | Carving, aerospace, auto, concrete tools, 3C (cell phone / camera / compute), water heater, refrigerator,gas pipelines etc. |
|
Features of Magnesium alloy rod
|
1. Good resistance to deformation force 2. Good sag resistance 3. Good absorption of vibration energy performance 4. Good impact energy absorption characteristics 5. Low melting, small specific heat |
| Surface | ordinary industrial surface, or customized |
| Material | magnesium alloy |
Chemical Composition (%)
Al: 8.3-9.7
Mn: 0.15-0.5
Zn: 0.35-1.0
Si: 0.10
Cu: 0.030
Ni: 0.002
Iron max: 0.005
Mechanical Properties of the cast billet and slab:
Tensile strength: 140Mpa
Yield strength: 100Mpa
Elongation: 2%
Hardness: 63HBW
Density: 1.81g/cm3
We also produce the forged AZ91D blocks, the max. size is 300 x 500 x 1000mm.
Mechanical Properties:
Tensile strength: 250Mpa
Yield strength: 160Mpa
Elongation: 6%
XIAN YUECHEN METAL PRODUCTS CO., LTD. (XYMCO) is one of the leading manufacturer of magnesium alloy products located in Xincheng Hi-Tech Industry Estate, Xi’an, Shaanxi, China, who is specialized in the development, manufacture and supply of magnesium alloy products worldwide included magnesium tooling plate, magnesium alloy plate, magnesium alloy sheet, magnesium alloy slab, magnesium alloy bar, magnesium alloy billet, magnesium alloy rod, magnesium alloy tube, magnesium alloy pipe, magnesium alloy profile, magnesium welding wire, magnesium alloy extrusion, magnesium alloy stamping, magnesium alloy casting, magnesium alloy forging and semi - fabricated component according to customer’s design.
We comply with the specifications:
GB5153-03, GB5154-04, AMS4377G, ASTM B90/B90M-15, MIL-DTL 32333, MIL-T-38749, QQ-M-44B, ASTM B107/B107M-13 and ASTM B91-97
Material grades: AZ31B, AZ61A, AZ80A, AZ91D, AZ41M, ZK60, AM50, AM60, ZM21, MIA, ME20M, EQ21, WE43, WE54, ZE41, etc.
Our main products and capabilities are as follows:
1. Magnesium tooling plate: Max. Thickness: 300mm; Max. Width: 2000mm; Max. Length: 6000mm
2. Magnesium alloy cast slab: Max. Size: 400 x 1000 x 3000mm
3. Magnesium alloy sheet: Min. Thickness: 0.5mm; Max. Width: 600mm; Max. Length: 2000mm
4. Magnesium cast billet: Min. Diameter 90mm; Max. Diameter: 600mm; Max. Length: 6000mm
5. Magnesium alloy extruded wire: Dia.1.0mm – 8.0mm in spool.
6. Magnesium alloy extruded rod: Min. Dia. 8mm; Max. Diameter: 450mm; Max. Length: 3000mm
7. Magnesium extrusions:
Round tube: Max. OD600mmx thickness 125mm
Square tube: 430 x 430mm
Flat bar: 920 x 160mm
U-Shape: 800 x 300mm
Rectangular: 700 x 200mm
8. Magnesium-Lithium Alloy rod, sheet, plate and tube.
Our products already were exported to USA, Japan, Israel, India, Germany, Iran, Columbia, Italy and UK. Good quality, good price and good delivery.
Looking forward to your enquiry and hope a prosperous cooperation can be established between us.
Applications of our extruded products:
The special characteristics of magnesium such as its light weight and damping capacity make it therefore, a material that is readily used in several different applications.
Automotive
| Engine blocks | Steering column parts | Seat components |
| Bed plates | Brake and pedal brackets | Roof panels |
| Transmission houses | Airbag retainers | Fuel tank covers |
| Transfer cases | Radio frames + heatsinks | Engine hoods |
| Head covers | Radio covers | Rear deck lids |
| Oil pans | Mirror brackets | Full magnesium doors |
| Knee bolsters | Door handles | Wheels |
| Steering wheels | Front ends | Radiator supports |
Sport and Leisure
| Luggage frames | Suit cases | Tennis rackets |
| Bicycle frames | Camping equipment | Snowshoes |
| Mountain bike frames | Eyewear frames | Bull floats |
Common applications
| Cellular phones | Multi-media housings | Camcorders |
| Antenna housing | Camera Housings | Electric shavers |
| Loudspeaker frames | Projector frames | Printers |
| Laptop Housings | Batteries | Headphones |
| Train Seats | Aviation components | Turbine engines |
| Truss constructions | Cargo floors | Powertools |
| Chain saws | Concrete trowels | Wall saws |
| Ladders | Scaffoldings | Shelves |
Our Services:
1. Small order quantity available
2. Professional engineering team and sales team
3. Payment: T/T & Western Union
4. OEM/ODM Supporttable
5. Free samples provided
6. Competitive price and high quality
FAQ:
1. Q: Are you a factory or trading company?
A: We are direct manufacturer located in Xi'an, Shaanxi province, and have our equipment!
2. Q: Are your products customized?
A: Yes,the products in the website are only the common type or the previous types, we can supply the new products according to your requirements or drawings.
3. I do not know how to use your product ?
Do not worry ! We can supply technical guidance together with products.
4. Q: How can I get some samples?
A: Several samples are freely offered for buidling the business long-term relationships and letting our customers believing the quality of our products.
Contact Person: sales
Tel: +8618966935566
