|
Product Details:
Payment & Shipping Terms:
|
| Light Weight: | Absorbs Vibration For Longer Life, While Retaining Dimensional Stability. | Stablity: | No Stress Relief After Machining; No Warps And Is Dent Resistant. |
|---|---|---|---|
| COSTS: | Machine Dry, Without Oil Or Chemicals. | TOOLING: | 4 To 5 Times Greater Tool Life. |
| FINISH: | Up To 5 Times More Machinable Than Rolled Aluminum. | NONMAGNETIC: | Good For Electrical And Computer Applications. |
| WEIGHT: | Easier Handling Saves Energy And Time. | FLATNESS: | Eliminates Surface Machining. |
| WELDING: | Strong Weldments Up To 95% Of Parent Metal, With Minimal Porosity. | ALKALI-RESISTANT: | Makes For Easy Cleaning. |
| STRENGTH: | Excellent Strength And Stiffness Per Unit Weight. | NON-GALLING: | Sound And Rugged Surface, Offering A Low Coefficient Of Friction And Minimum Wear, |
| High Light: | magnesium bar stock,magnesium flat bar |
||
ALLOY AZ 61A-F hollow
Material Notes:
Mg content calculated as balance. Similar to but stronger than AZ31B-F.
Component Value Min Max
Aluminum, Al 5.8 7.2
Copper, Cu 0.05
Iron, Fe 0.005
Magnesium, Mg 92
Manganese, Mn 0.15
Nickel, Ni 0.005
Silicon, Si 0.1
Zinc, Zn 0.4 1.5
Properties Value Min Max Comment
Physical
Density, g/cc 1.8 -- --
Mechanical
Hardness, Brinell 50 -- -- 500 kg load, 10 mm ball
Tensile Strength, Ultimate, MPa 280 -- --
Tensile Strength, Yield, MPa 165 -- --
Elongation at Break, % 14 -- -- in 50 mm
Modulus of Elasticity, GPa 45 -- -- In Tension
Compressive Yield Strength, MPa 110 -- --
Poissons Ratio 0.35 -- --
Fatigue Strength, MPa -- 125 160
R.R. Moore test; 1E+8
cycles
Machinability, % 100 -- --
Relative Rating,
100=Best
Shear Modulus, GPa 17 -- --
Electrical
Electrical Resistivity, ohm-cm 1.25e-005 -- --
Thermal
Heat of Fusion, J/g 370 -- --
CTE, linear 20°C, µm/m-°C 26 -- --
from 0-100°C (32-
212°F)
CTE, linear 100°C, µm/m-°C 27 -- --
20 - 200ºC. Estimated
from similar Mg alloys.
Specific Heat Capacity, J/g-°C 1.05 -- --
Thermal Conductivity, W/m-K 70 -- --
Estimated from trends
in similar Mg alloys.
Melting Point, °C -- 418 -- Incipient Melting
Solidus, °C 525 -- --
Liquidus, °C 620 -- --
Applications of our extruded products:
The special characteristics of magnesium such as its light weight and damping capacity make it a material that is readily used in several different applications.
Automotive
| Engine blocks | Steering column parts | Seat components |
| Bed plates | Brake and pedal brackets | Roof panels |
| Transmission houses | Airbag retainers | Fuel tank covers |
| Transfer cases | Radio frames + heatsinks | Engine hoods |
| Head covers | Radio covers | Rear deck lids |
| Oil pans | Mirror brackets | Full magnesium doors |
| Knee bolsters | Door handles | Wheels |
| Steering wheels | Front ends | Radiator supports |
Sport and Leisure
| Luggage frames | Suit cases | Tennis rackets |
| Bicycle frames | Camping equipment | Snowshoes |
| Mountain bike frames | Eyewear frames | Bull floats |
Common applications
| Cellular phones | Multi-media housings | Camcorders |
| Antenna housing | Camera Housings | Electric shavers |
| Loudspeaker frames | Projector frames | Printers |
| Laptop Housings | Batteries | Headphones |
| Train Seats | Aviation components | Turbine engines |
| Truss constructions | Cargo floors | Powertools |
| Chain saws | Concrete trowels | Wall saws |
| Ladders | Scaffoldings | Shelves |
Xi’an Yuechen Metal Products Co., Ltd. - XYMCO has manufactured magnesium alloy rod/bar from 1995. We have production capacity with 1250 tonne press, 2500 tonne press and 3600 tonne press in house, our subcontract company has the 8000 tonne press and 10000 tonne press so that we can supply our customers big section extrusions.
Our extrusion capacity is as follows:
Round tube: Max. OD600mmx thickness 125mm
Square tube: 430 x 430mm
Flat bar: 920 x 160mm
U-Shape: 800 x 300mm
Rectangular: 700 x 200mm
Available extrusion alloys:
AZ31B, AZ61A, AZ80A, M1A, ZK60A, Pure Magnesium and Custom alloys
Heat treatment is available as per customer’s application.
Specification:
ASTM B107/B107M-13
GB standard
Existing extrusion mould of rod/bar:
Dia. 12mm, Dia. 15mm, Dia. 20mm, Dia. 30mm, Dia. 40mm, Dia. 50mm, Dia. 60mm, Dia. 70mm, Dia. 80mm, Dia. 90mm, Dia. 100mm, Dia. 140mm, Dia. 165mm, Dia. 170mm, Dia. 210mm
| type | magnesium alloy rod |
| Thickness |
300 mm or as customer's required
|
| Width | 900.0 mm or as customer's required |
| Length | 2000mm or as customer's required |
| size | 1000*2000mm, 1219*2438mm, 1219*3048mm, or as customer's required |
| Application | Carving, aerospace, auto, concrete tools, 3C (cell phone / camera / compute), water heater, refrigerator,gas pipelines etc. |
|
Features of Magnesium alloy rod
|
1. Good resistance to deformation force 2. Good sag resistance 3. Good absorption of vibration energy performance 4. Good impact energy absorption characteristics 5. Low melting, small specific heat |
| Surface | ordinary industrial surface, or customized |
| Material | magnesium alloy |
Our Services:
1. Small order quantity available
2. Professional engineering team and sales team
3. Payment: T/T & Western Union
4. OEM/ODM Supporttable
5. Free samples provided
6. Competitive price and high quality
FAQ:
1. Q: Are you a factory or trading company?
A: We are direct manufacturer located in Xi'an, Shaanxi province, and have our equipment!
2. Q: Are your products customized?
A: Yes,the products in the website are only the common type or the previous types, we can supply the new products according to your requirements or drawings.
3. I do not know how to use your product ?
Do not worry ! We can supply technical guidance together with products.
4. Q: How can I get some samples?
A: Several samples are freely offered for buidling the business long-term relationships and letting our customers believing the quality of our products.
Contact Person: sales
Tel: +8618966935566
