|
Product Details:
Payment & Shipping Terms:
|
Name: | 4 To 5 Times Greater Tool Life Magnesium Tooling Plate | DAMPING: | Absorbs Vibration For Longer Life, While Retaining Dimensional Stability |
---|---|---|---|
COSTS: | Machine Dry, Without Oil Or Chemicals. | NONMAGNETIC: | Good For Electrical And Computer Applications. |
STABILITY: | No Stress Relief After Machining; No Warps And Is Dent Resistant. | ||
High Light: | AZ31B Magnesium Tooling Plate,AMS 4375 Magnesium Tooling Plate,AZ31B magnesium alloy plate |
4 To 5 Times Greater Tool Life Magnesium Tooling Plate
AZ31B magnesium-based alloy is forged, has good room temperature strength and ductility, and corrosion resistance and weldability. Followed by strain hardening and annealing section (H24 and H26 temper), can improve the strength. The size range of our plates is:
Sheet: a thickness of from 0.5mm to 6mm; maximum width of 600mm; the maximum length of 6000mm
Plate: a thickness of from 6 mm to 200 mm; maximum width of 2000mm; maximum length of 6000mm
Block: We can provide pre-cut according to customer requirements.
APPLICATIONS
Sheet and plate in AZ31B find application in medium strength service at temperatures below 150°C. Diverse uses including aerospace, aircraft, concrete tools, 3C (cell phone / camera / computer), speaker cones and textile machinery can all benefit from light weight AZ31B.
AZ31B is non-magnetic and has a high electrical and thermal conductivity, RFI and EMI shielding filled in the electronics and computer industry requirements.
Superplastic forming of AZ31B sheet at elevated temperatures allows production of a wide variety of intricate parts for automotive uses. Monocoque construction utilizing formed sheet can be adapted to many commercial applications.
SPECIFICATIONS
ASTM B90/B90M-07
AMS 4375
AMS 4376
AMS 4377
CHEMICAL COMPOSITION
Al: 2.5-3.5%
Zn: 0.7-1.3%
Mn: 0.20 – 1.0%
Mg: Balance
Physical properties
Density: 1.78
Coefficient of thermal expansion: 26.8 x 10-6K-1
Specific heat: 1040 Jkg-1k-1
Thermal conductivity: 76.9Wm-1k-1
Resistivity: 92nΩm
Elastic modulus: 45 x 109Pa
Poisson's ratio: 0.35
Melting point: 566-632 ° C
HEAT TREATMENT
After manufacture, no heat treatment may be used to increase the strength of the alloy.
MECHANICAL PROPERTIES
Alloy and Temper | Thickness (mm) |
Yield Strength 0.2% offset (MPa) |
Tensile strength (MPa) |
Elongation In 5.65 √A (%) |
AZ31B-O | 0.5 – 1.5 | 125 | 221 | 10 |
1.5 – 6.3 | 105 | 221 | 9 | |
6.3 - 75 | 105 | 221 | 8 | |
AZ31B-H24 | 0.5 – 6.3 | 200 | 269 | 5 |
6.3 -9.5 | 179 | 262 | 7 | |
9.5 – 12.7 | 165 | 255 | 8 | |
12.7 - 25 | 152 | 248 | 8 | |
25- 50 | 138 | 234 | 6 | |
50 - 80 | 124 | 234 | 7 | |
AZ31B-H26 | 6.3 - 10 | 186 | 269 | 6 |
10 – 12.5 | 179 | 262 | 6 | |
12.5 - 20 | 172 | 255 | 5 | |
20 – 25 | 159 | 255 | 5 | |
25 - 40 | 152 | 241 | 5 | |
40 - 50 | 148 | 241 | 5 |
The sheet and plate shall conform to the tensile requirements in above Table unless other agreement is made between seller and purchaser. Mechanical Properties for sizes and tempers not shown in above Table shall be as agreed upon by seller and purchaser.
OTHER PROPERTIES
Typical Hadness
O temper: 67 Rockwell E
H24 temper: 83 Rockwell E
WELDABILITY
Excellent weldability with gas shielded arc using AZ61A (preferred) or AZ92A filler rod; post weld stress relief is required to prevent stress corrosion cracking. Resistance welding is excellent.
Machining
Like all the same magnesium alloy sheet, AZ31B processing speed faster than any other metal. As long as the part geometry allows the limiting factor is the power and speed of the machine, rather than the mass of the tool material. The different processing operations, required power per cubic centimeter metal removal ranged from 9 Watts to 14 Watts per minute.
DENT RESISTANCE
Weight for weight, AZ31B-H24 has proven to be superior to competitive materials in its resistance to denting at moderate energy levels.
Dent Resistance of 1mm Gauge Sheet (Dent depth in mm from 25mm spherical redius indentor on 350mm span)
Impact Energy 0.34 J | Impact Energy 0.62 J | Impact Energy 1.25 J | |
AZ21B-H24 6061 – T6 3003 – H14 5052 – H34 2024 – T6 SAE 1010 Mild Steel |
0.66 0.94 2.24 1.55 0.99 1.09 |
1.42 1.52 3.23 2.41 1.52 1.70 |
2.34 2.46 4.90 3.35 2.29 2.67 |
Surface treatment
All conventional chromate treatment, anodizing, plating and finishing process are readily applied. AZ31B plasma electrolytic oxidation reaction process is also good.
Corrosion resistance
Continuous exposure of 2.5 years.
Oceanic and Atmospheric
AZ31B-H24 0.008mg.cm-2d-1
Low carbon steel 0.323mg.cm-2d-1
Industrial atmosphere
AZ31B-H24 0.013mg.cm-2d-1
Low carbon steel 0.055mg.cm-2d-1
Rural atmosphere
AZ31B-H24 0.006mg.cm-2d-1
Low carbon steel 0.032mg.cm-2d-1
Application
Those applications that require flat surfaces or high dimensional stability benefit from the use of magnesium tool plates. Typical uses include fixtures, fixtures, optical benches, vibration test equipment and inspection gauges. Magnesium mold plates are non-magnetic and have high electrical and thermal conductivity, which can meet the requirements of many materials in the electronics and computer industries.
Contact Person: sales
Tel: +8618966935566