|
Product Details:
Payment & Shipping Terms:
|
| Light Weight: | Magnesium Is A Lightest Structural Metal, About The Two Third Of The Density Of Aluminum, One Fourth Of Steel, Copper And Brass. | Good Strength: | Excellent Strength And Stiffness Per Unit Weight. |
|---|---|---|---|
| Long Tooling Life: | Magnesium Has Longer Tool Life Than Aluminium (for Die Casting And Extursion) | Stability: | No Stress Relief After Machining; No Warps And Is Dent Resistant. |
| High Light: | az31 magnesium alloy,magnesium metal alloy |
||
Xi'an Yuechen Metal Products. Co., Ltd. (XYMCO) XYMCO’s key products - AZ31 magnesium tooling plate, AZ31-TP magnesium tooling plate, AZ31B-TP magnesium tooling plate, AZ31B-O magnesium tooling plate, AZ31B magnesium tooling plate, AZ31B-H24 magnesium tooling plate, AZ80A magnesium tooling plate, AZ91D magnesium tooling plate, AM50A magnesium tooling plate, AM60A magnesium tooling plate, purity magnesium tooling plate, which are produced from fine-grain magnesium alloys which is free from internal stresses. This material is internally stable, which assures minimum movement during machining. Tool & Jig plate is a machined product with flat surfaces and a surface finish equal to 32 micro-inches or better on both sides. It is readily machined with very little distortion.
Cast magnesium tooling plate is used where strength is not a requirement, but minimal machining distortion along with flatness is required. This material is non-heat treatable.
XYMCO - a manufacturer specialized in the magnesium tooling plate, Magnesium alloy plate, magnesium alloy slab, magnesium alloy sheet, magnesium alloy bar, magnesium alloy tube, magnesium alloy billet, magnesium alloy rod, magnesium alloy rod, magnesium alloy pipe, magnesium welding wire, magnesium alloy profile, magnesium alloy forging, magnesium alloy casting, magnesium alloy machining part.
We comply with the specifications: AMS 4377G, AMS 4382, ASTM B90/B90M and ASTM B107.
Material grades: AZ31B, AZ61A, AZ80A, ZK60, AM50, AM60, AZ91, EQ21, EZ33, EV31, WE43, WE54 and ZE41.
Our main products and capacities are as follows:
1. Magnesium tooling plate: Max. Thickness: 300mm; Max. Width: 3000mm; Max. Length: 6000mm
2. Magnesium alloy slab: Max. Size: 400 x 1000 x 2500mm
3. Magnesium alloy sheet: Min. Thickness: 0.5mm; Max. Width: 600mm; Max. Length: 2000mm
4. Magnesium cast bar: Min. Diameter 90mm; Max. Diameter: 600mm; Max. Length: 6000mm
5. Magnesium extrusions:
Round tube: Max. OD 600mmx thickness 125mm Square tube: 430 x 430mm Flat bar: 920 x 160mm
U-Shape: 800 x 300mm Rectangular: 700 x 200mm
6. Magnesium alloy machined part according to customer’s design
7. Magnesium anode as per customer’s design
STANDARD DIMENSIONAL TOLERANCES FOR TOOLING PLATE
| GAUGE TOLERANCES | WIDTH TOLERANCES | LENGTH TOLERANCES | ||||||
| Specified Gauge | Tolerance | Specified Width | Tolerance | Specified Width | Tolerance | |||
| Over | Thru | Over | Thru | Over | Thru | |||
| 6.3 | 19mm | +/-0.25mm | 0 | 250mm | +4.75mm | 0 | 250mm | +4.75mm |
| 19 | 32mm | +/-0.43mm | 250 | 1220mm | +9.50mm | 250 | 1220mm | +9.50mm |
| 32 | 50mm | +/-0.64mm | 1220 | 1825mm | +12.7mm | 1220 | 1825mm | +12.7mm |
| 50 | 75mm | +/-1.25mm | 1825 | 1950mm | +15.9mm | 1825 | 6000mm | +15.9mm |
| 75 | 83mm | +/-1.65mm | - | - | - | - | - | - |
| 83 | 90m | +/-2.00mm | - | - | - | - | - | - |
| 90 | 100mm | +/-2.80mm | - | - | - | - | - | - |
| 100 | 125mm | +/-3.20mm | - | - | - | - | - | - |
| 125 | 150mm | +/-3.40mm | - | - | - | - | - | - |
| 150 | 175mm | +/-3.705mm | - | - | - | - | - | - |
TOOLING PLATES STANDARD METRIC SIZES
| 6.35 x 1250 x 2500mm | 20 x 1500 x 4000mm | 50 x 1500 x 4000mm |
| 6.35 x 1250 x 4000mm | 25 x 1250 x 2500mm | 60 x 1250 x 2500mm |
| 10 x 1250 x 2500mm | 25 x 1250 x 4000mm | 60 x 1250 x 4000mm |
| 10 x 1250 x 4000mm | 25 x 1500 x 4000mm | 60 x 1500 x 4000mm |
| 12.7 x 1250 x 2500mm | 30 x 1250 x 2500mm | 75 x 1250 x 2500mm |
| 12.7 x 1250 x 4000mm | 30 x 1250 x 4000mm | 75 x 1250 x 4000mm |
| 12.7 x 1500 x 4000mm | 30 x 1500 x 4000mm | 75 x 1500 x 4000mm |
| 15 x 1250 x 2500mm | 40 x 1250 x 2500mm | 100 x 1250 x 2000mm |
| 15 x 1250 x 4000mm | 40 x 1250 x 4000mm | 125 x 1250 x 2000mm |
| 15 x 1500 x 4000mm | 40 x 1500 x 4000mm | 150 x 1250 x 1500mm |
| 20 x 1250 x 2500mm | 50 x 1250 x 2500mm | |
| 20 x 1250 x 4000mm | 50 x 1250 x 4000mm |
Contact Person: Mr. FRANK ZHANG
Tel: +86 189 66935266
Fax: 86-029-8263-6374
